Buying a high-performance trailed blower is only the first step.
Standardized operation can protect your turf, extend machine service life and get better cleaning results. There are several core tips for grounds staff to follow.
Before starting the trailed blower, inspect the whole machine: check engine oil, fuel, fasteners, impeller and air nozzle, confirm the hitch connection with the tractor is locked firmly.
Clear large hard stones and branches on the working route in advance to avoid being sucked into the turbine and damaging the impeller.
When starting, run the engine at idle speed first, then gradually increase throttle instead of full load immediately.
When working on turf, choose proper wind speed according to different areas.
• For delicate greens and tee boxes: Use low to medium wind speed to prevent sand and topdressing materials from being blown away excessively.
• For rough areas, football fields and tree-lined zones: Switch to high wind speed for thick leaves.
Keep a stable forward towing speed, do not rush or stop frequently.
The 360-degree nozzle should be adjusted to blow debris toward the collection area, avoid blowing dirt and debris directly into the green surface or irrigation heads.
Pay attention to working time arrangement. It is better to avoid operating in high temperature at noon.
Post-Operation & Maintenance
After finishing daily work, clean the air duct and filter of the trailed blower, remove grass debris stuck on the machine body, and do regular maintenance as required.
Improper operation will not only cause machine failure, but also lead to turf thinning, sand loss and uneven surface.
Our factory supplies trailed blowers with remote control and adjustable wind speed.
If you need operation manuals and supporting maintenance suggestions for turf blowers, contact us anytime.
Post time: Nov-04-2026